Plumber

Water Heater Replacement

A water heater is usually replaced when the tank leaks, the hot water runs out sooner than it used to, or repairs stop making sense. The job is choosing the right size and fuel, taking the old heater out, and fitting the new one with the valves, venting and permit it needs.

Get an estimate

What the job includes

  • Choosing the heater. Tank or tankless, gas or electric, sized for your household.
  • Removing the old heater. Drained, disconnected and taken out.
  • Installing the new one. Water, gas or power, and the vent, connected to code.
  • Safety parts. A relief valve, and an expansion tank where your plumbing needs one.
  • Permit and inspection. The permit your town requires, and its inspection.
  • Testing. Filled, turned on and checked for leaks.

How it goes

  1. 1Send your town and photos of the heater, its label and the pipes around it.
  2. 2Get a price for the heater that fits, or a visit if the space needs a closer look.
  3. 3Book the day. The old heater comes out and the new one goes in.
  4. 4The heater is tested, then inspected under the permit.

What to send first

Your town, a photo of the label on your current heater, and photos of the heater with the pipes and vent around it.

Common questions

Should I repair my water heater or replace it?

If the tank itself leaks, it needs replacing. A part such as a thermostat, element or valve can often be repaired. The age on the label and a few photos help a pro tell you which.

Can I switch from a tank to a tankless heater?

Often, but it can mean new gas piping, venting or electrical work. Ask your pro to price the switch, not just the heater.

Do I need a permit to replace a water heater?

Usually. Most towns require one, and a gas heater has its gas work inspected. Ask your pro to include the permit in the price.

More about plumber with ZenHome